User's Manual

User
AN-100U/UX Base Station
Manual
70-00058-01-04 Proprietary Redline Communications © 2010 Page 96 of 136 April 19, 2010
Table 43: CLI - Show Command
Command
Parameter/Description
PhysAddress:.... 0:09:02:00:89:
AdminStatus:..... up(1)
OperStatus:...... up(1)
LastChange:...... 00:00:13
interfaces
Display device interfaces. For example:
Index Description MAC Address
1 802.16 00 09 02 00 89 c1
2 802.3 00 09 02 00 89 c1
3 802.3 00 09 02 00 89 c1
ipAddress
Display the IP address data.
Address: <IP Address> - IP Address
Mask: <IP Address> - Subnet Mask.
Dhcp: Enable/disable DHCP support.
0: Static address entered by user.
1: DHCP allocated address.
Gateway: <IP Address> - Default GatewayAddress.
If no field name is specified, the whole data structure is displayed. For
example:
Structure --- <<SC IP Address Data>>
Address:......................192.168.20.97
Mask:.........................255.255.255.0
Dhcp:.........................StaticIP(0)
Gateway:......................192.168.20.250
learnedHosts
Display learned MAC addresses of the specified SS.
<MacAddr> MAC address of a provisioned SS.
privacy
Display base station privacy settings.
TrustAll - 0 -- no, 1 -- yes.
AKLifetime - Lifetime in seconds for new AK.
TEKLifetime - Lifetime in seconds for new TEK.
sfInfo
Display service flow info.
<MAC Address> - Specify the subscriber MAC address
downlink - Display downlink service flow information.
uplink - Display uplink service flow information.
For example:
AN-100U(show->)#> sfInfo 00:09:02:00:8c:7f downlink
<< SF Information >>
--- Downlink ---
IfBsSfId:.....................5106
ScSchedulingType:.......bestEffort(2)
MaxSustainedRate:.............800000 bps
ScArqEnable:.............false(2)
MinReservedRate:..............0 bps
SfInfoOctets:..............251088824
MaxLatency:...................0 ms
SfInfoTrafficRate:.......787 Kbps
TrafficPriority:..............1
SfInfoPkts:..................256244
snmpAccCtrl
Display SNMP access community strings.
For example:
AN-100U(show->)#> snmpAccCtrl
<< SNMP Access Control Table >>
Read Access string: Write Access string: IP Address:
public private 0.0.0.0
public 1 public 1 0.0.0.0
ssInfo
Display information about selected/all subscribers. If no MAC address is
entered, information for all subscribers is returned. For example:
<MAC Address> - Specify the subscriber MAC address
<< SS Information >>
MAC Address:..................00:09:02:00:a1:21