User's Manual

AN-30e
user manual
70-00035-01 Proprietary Redline Communications © 2004 November 2004
Page 46 of 104
5.5.3 System Configuration Buttons
Save: Click this button to save the current parameter settings. Note that changing
some parameters initiates a system reboot.
Test: Click this button to have the system activate the current configuration settings
for a period of five minutes. Click Save at any time during this period to permanently
save the current settings. Following this interval the system reboots and loads the
previously saved settings (test settings are discarded).
System Reset: Click this button to reboot the system. Resets all statistics and unsaved
changes to the configuration are discarded.