User's Manual

AN-50e
user manual
70-00033-02 Proprietary Redline Communications © 2004 November 2004
Page 63 of 96
6.4.3 SNMP Settings Screen
Click Configure SNMP (blue text) on the System Configuration screen to view
and edit the SNMP settings. The blue text will only appear if the SNMP Enable
box is checked.
Figure 28: System Configuration Screen - SNMP Access
The SNMP Configuration screen displays a list of the current communities. The
control buttons can be used to add, edit or delete communities.
Figure 29: SNMP Configuration Screen
SNMP Configuration: The list of defined communities is displayed in the
Community Name table.
Edit: Select a community from the pull down menu and click the Edit button to
modify an existing community. The Community Configuration/Trap Configuration
screen will be displayed.
Delete: Select the community from the pull down menu (bottom left of screen) and
then click the Delete button to delete that community. Note that it is not possible to
delete the public SNMP community, but the access level can be changed.
Add Community: Click the Add Community button to add a new community.
The Community Configuration/Trap Configuration screen will be displayed.
Add Community: To add a new community, click Add Community button. The
Community Configuration/Trap Configuration screen will be displayed.
Community Configuration:
Community Name: The SNMP community name. After clicking Save, this name
will appear in the drop down list on the main SNMP Configuration screen.