User's Manual
Table Of Contents
- Contact Information
- UL Information
- LIST OF TABLES
- Getting Started
- Important Safety Information
- Important Service Information
- Unpacking the AN-50 System
- AN-50 System Mode of Operation
- The AN-50 Terminal at a Glance
- AN-50 System Installation
- System Configuration and Operation Via the Web Interface
- Diagnostics and Troubleshooting
- Appendix
AN-50 System User Manual
Redline Communications …..solving the first mile challenge.
UL QoS Level: Enter the uplink QoS level. See “PMP Configuration Tool” appendix
section below for more information.
Link Configuration ID:
Apply: Saves changes to the current link ID configuration. Ensure that “Save ID” is
completed before rebooting the system, otherwise configuration information will be lost
New ID: Save current ID configuration under a new Link Name.
8.2.2. Wireless Link Statistics
This screen is displayed through the ID Config / Status screen by pressing the Status
button.
Figure 18: Wireless Link Status
Wireless link Statistics
Link Name: Displays the link name from the system memory. The name remains with
the system even during power off states, until the operator re-types a new name using
this menu field.
Link ID: Displays the link ID automatically defined by the AN-50 System for the link
name.
Page 35 of 76