User's Manual
Table Of Contents
- Contact Information
- UL Information
- LIST OF TABLES
- Getting Started
- Important Safety Information
- Important Service Information
- Unpacking the AN-50 System
- AN-50 System Mode of Operation
- The AN-50 Terminal at a Glance
- AN-50 System Installation
- System Configuration and Operation Via the Web Interface
- Diagnostics and Troubleshooting
- Appendix
AN-50 System User Manual
Redline Communications …..solving the first mile challenge.
8.7. System Password
The factory default password for the system is "admin" for the administrator’s ID, and
“user” for the user’s ID. To change the password, click on System Password from the
main menu and apply a new value in the New Password field (see Figure 25) using any
alphanumeric combination. Note the field is case sensitive and can be up to 16
characters in length.
For more information on password related issues, see section 8 on page 27.
Note: depressing the front panel Reset button for more that five (5) seconds will restore
the factory default passwords.
Figure 25: System Password
Page 43 of 76