User's Manual
Table Of Contents
- Contact Information
- UL Information
- LIST OF TABLES
- Getting Started
- Important Safety Information
- Important Service Information
- Unpacking the AN-50 System
- AN-50 System Mode of Operation
- The AN-50 Terminal at a Glance
- AN-50 System Installation
- System Configuration and Operation Via the Web Interface
- Diagnostics and Troubleshooting
- Appendix
AN-50 System User Manual
Redline Communications …..solving the first mile challenge.
AN-50 System Specifications continued….
Power Requirements Single or dual 110/220/240 VAC (auto-sensing) 50/60 Hz
39W maximum
Operating Temperature
Range
AN-50 Terminal Operating Conditions: 41F to 104F / 5C to 40C
AN-50 Terminal Short-Term Conditions: 23F to 41F and 104F to
131F / -5C to 5C and 40C to 55C for up to 16 hours
T-58 Operating Conditions: -40F to +140F / -40C to +60C
Wind Loading AN-50 Radio: 137 mph / 220 km/hr
Physical Configuration AN-50 terminal, AN-50 Radio (T-58 Transceiver and antenna)
AN-50 Dimensions 17” x 12” x 1.75” / 431.8 mm x 304.8 mm x 44.45 mm
Component Weights
AN-50 Terminal ……………………………………. 2.0 kg
T-58 Transceiver …………………………………… 1.0 kg
Vertical Mast Bracket Kit ………………….……… 3.0 kg
Vertical Mast Bracket Hardware Kit ……………… 0.5 kg
Cable, F Male/F Male, RG6, 100 ft 1.3 kg
A
ntenna……………..…………………………….… 1.0 to 27.0 kg
Page 72 of 76