Manualshelf

User's Manual

ManualsBrandsRedline Communications ManualsElectronicsBROADBAND WIRELESS SYSTEM
11121314151617181920
RedCONNEX
TM
AN-80i
PTP & PMP User Manual
70-00072-01-04-DRAFT Proprietary Redline Communications © 2007 May 7, 2007
Page 51 of 91
4.6 Statistics Screens
4.6.1 Link Statistics
The Link Statistics screen is accessible only from the Links browse screen. Click Links in
the menu and then click
Status to display the statistics screen.
Figure 30: PMP - Link Statistics Screen
General
Link Name: User-assigned name for this link.
Link
ID: Unique number identifying this link.
Peer MAC: MAC Address of the subscriber.
Active: Indicates if wireless link is operational (Active=YES).
Link Up Time: Total time the wireless link has been operational.
Link lost Count: Number of times link has been out of service.
Status Code: Code indicating the condition of the AN-80i system. Status indications are
specific for PMP and PTP operation.
Configured
Connections: The number of Connections configured on this link.
Wireless
The following statistics are displayed for both uplink and downlink.
Burst Rate: The current uncoded burst rate for the link.
RSSI: RSSI measured since the last screen refresh.
SINADR: Average signal to interference, noise, and distortion ratio measured since the last
screen refresh.