User's Manual

RedCONNEX
TM
AN-80i
PTP & PMP User Manual
70-00072-01-04-DRAFT Proprietary Redline Communications © 2007 May 7, 2007
Page 63 of 91
5.3.7 New
Use the new command to create a new link, group, or connector ID.
Table 19: CLI - new
PTP PMP Parameter/Description
√
new
<id_type> - [link | group | conn]
<id> - <id number>
5.3.8 Reset
Use the reset command to set all AN-80i statistics values to zero.
Table 20: CLI - reset
PTP PMP Parameter/Description
√ √ stats: Reset the AN-80i statistics counters.
reset stats <Enter>
5.3.9 Save
Use the save command to copy edited parameter settings into non-volatile memory.
save [option] <Enter>
Table 21: CLI - save
PTP PMP Parameter/Description
√ √ config: Save Ethernet, wireless, and user configuration settings.
snmp: Save SNMP settings.
defaultconfig: Overwrite current settings with the factory default Ethernet,
wireless, and SNMP settings.
5.3.10 Script
Use the script command to save a file containing a string of CLI commands that can be
used to restore the current (active) configuration of the AN-80i.
Table 22: CLI - script
PTP PMP Parameter/Description
√
script
<server> - [server IP address]
<name> - [script file name]