User's Manual

RedCONNEX
TM
AN-80i
PTP & PMP User Manual
70-00072-01-04-DRAFT Proprietary Redline Communications © 2007 May 7, 2007
Page 69 of 91
Table 23: CLI - set
√ √
telnetport: Enter Telnet port address (default is 23).
√ ulqos: Uplink QoS.
<id> - [id number]
<qos> - <QoS>
√ ulrate: Set the uplink rate.
<id> - [id number]
<rate> - <rate>
5.3.12 Show
Use the show command to display system statistics.
show <Enter> Change to 'show' mode.
show [field] <Enter> Display values for the selected parameter.
Table 24: CLI - show
PTP PMP Description
√
config: list all system configuration information.
Example:
192.168.25.2(show)# config
System Information:
sysname = 1234567890
sysdescr = b
sysloc = c
syscontact = d
Ethernet Configuration:
ipaddr = 192.168.25.2
netmask = 255.255.255.0
gateway = 192.168.25.1
flowctrl = Off
sntp = On
sntpip = 192.168.25.1
sntppoll = 24
gmt = +0:00
syslog = Off
syslogip = 192.168.25.1
ethmode = auto
http = On
telnet = On
telnetport = 23
snmp = On
snmptraps = On
snmptraplink = On
mgmtag = Off
mgmvid = 0
Wireless Configuration:
rffreq = 5610.0
autoscan = Off
maxtxpower = 15
chwidth = 20 MHz
sysmode = pmpsc
swver = 10.00.027 (other: 2.00.004)
buzzer = On
regper = 18
maxdst = 2
radio = Off = 2
radio = Off
√
conns: list all Connections.
<id> - [id number]
Example:
192.168.25.2(show)# conns 14
27 SS-001-Data Conn