User Manual

RedCONNEX
TM
AN-80i PMP
User Manual
70-00072-01-03 Proprietary Redline Communications © 2007 March 19, 2007
Page 21 of 60
Table 1: Web - System Log Messages
Log Message Description
1012 - System Description Load: OK, System description data successfully
read from non-volatile RAM.
1013 - System Description Save: OK, System description data successfully
saved to non-volatile RAM.
1014 - Options Key Load: OK, Options key value successfully read
from non-volatile RAM.
1015 - Options Key Save: OK, Options key properties successfully
saved to non-volatile RAM.
1016 - Options Key Properties Load: OK, Options key properties successfully
read from non-volatile RAM.
1017 - Options Key Properties Save: OK, Options key value successfully saved to
non-volatile RAM.
1018 - Options Key Activated: OK, Options key value entered was valid.
1019 - Data server started, The data server process was started
successfully.
1021 - Upgrade OK, Upload of binary file was completed
successfully.
1023 - Firmware configuration OK, The firmware configuration is valid.
1029 - HTTP(User Mgm): Chg User Attributes OK, Parameters entered though Web
interface were valid.
1030 - SNMP Configuration Load: OK, SNMP configuration values successfully
read from non-volatile RAM.
1031 - SNMP Configuration Save: OK, SNMP configuration values successfully
saved to non-volatile RAM.
2001 - System Configuration Load: ERROR, Error occurred when attempting to read
system configuration values from non-
volatile RAM. Values were not
loaded.
2002 - System Configuration Save: ERROR, Error occurred when attempting to save
system configuration values to non-
volatile RAM. Values were not
saved.
2003 - EEPROM Directory Load: ERROR, Error occurred when attempting to read
EEPROM directory values from non-
volatile RAM. Values were not
loaded.
2004 - EEPROM Directory Save: ERROR, Error occurred when attempting to save
EEPROM directory values to non-
volatile RAM. Values were not
saved.
2005 - User Configuration Load: ERROR, Error occurred when attempting to read
user configuration values from non-
volatile RAM. Values were not
loaded.
2006 - User Configuration Save: ERROR, Error occurred when attempting to write
user configuration values to non-volatile
RAM. Values were not
saved.
2007 - Network Configuration Load: ERROR, Error occurred when attempting to read
network configuration values from non-
volatile RAM. Values were not
loaded.