User's Manual
Table Of Contents
- Important Safety & Service Notices
- System Overview
- Web Interface - PTP
- PMP Operation
- CLI Interface
- Diagnostics and Troubleshooting
- Appendices
User
AN-80i
Manual
70-00072-01-06a Proprietary Redline Communications © 2008 Page 20 of 96 June 1, 2008
3.4 System Status
Click System Status in the menu to view system, Ethernet statistics, and wireless
interface statistics.
Figure 7: Web - System Status Screen
General information
System Name: Displays the user-assigned system name.
Software Version: Displays the software version in use.
RF Link Established: Status for the wireless link connection.
Yes - RF link has been successfully established with the remote-end AN-80i.
No - RF link has not
been established with the remote-end AN-80i.
Uncoded Burst Rate: The negotiated uncoded burst rate (UBR) for the link.
System Mode: The PTP Master establishes and manages the wireless link with the
remote end AN-80i. Each wireless link must have only one PTP Master.
PTP Master: An-80i transmits automatically; sending poll messages to the remote
AN-80i and negotiating the UBR (modulation and coding) for the wireless link.
PTP Slave: This unit waits passively until polled by the PTP Master.
RF Channel Frequency: User-assigned RF channel.
Tx Power: The current transmit power level. If ATPC is enabled, this value may be
different than the Tx Power setting in the
System Configuration screen.