User's Manual

User
AN-80i
Manual
70-00072-01-06a Proprietary Redline Communications © 2008 Page 76 of 96 June 1, 2008
Table 28: CLI - show
√ √
stats
<id> - <id>
Example:
(show)# stats 14
General Information:
sysname = abcdef
sysdescr = b
sysloc = c
syscontact = d
mac = 00:09:02:00:bb:77
boardtype = AN-80i Rev 1.0
radiotype = T54i
swver = 10.00.023 (other: 10.00.019)
sysuptime = 8 day(s), 20 hr, 19 min
sysstarttime = N/A
sysmode = pmpsc
rffreq = 5490.0
txpower = 10
chwidth = 20 MHz
rfstatus = 0 *
Ethernet Statistics:
erxpkt = 3081
erxpktd = 0
etxpkt = 8089
Wireless Statistics:
regstations = 0
regconn = 0
activelinks = 0
activeids = 0
Wireless Ethernet Statistics:
werxpkt = 4592
werxpktdis = 0
werxpkterr = 0
wetxpkt = 0
wetxpktdis = 0
wetxpkterr = 0
* Status codes are displayed in binary format. See section 6.4: Status Codes on
page 83 for details of the RF status codes.
5.3.15 Snmpcommunity
Use the snmpcommunity command to configure SNMP community permissions.
Table 29: CLI - snmpcommunity
PTP PMP Description
√ √ add: add a new snmp community to the snmp community table. The
index value is assigned automatically. Up to eight community entries can
be entered in the table.
snmpcommunity add <name> <string> <Enter>
snmpcommunity add <rights> 0 | r | w | rw <Enter>
Where.
0 (zero):Deny read and write permission.
r: Grant read access permission only. Deny write permission.
w: Grant write access permission only. Deny read permission.
rw: Grant read and write access permission for this community.
default: Set all snmp parameters to factory default settings.
snmpcommunity default <idx> <Enter>
del: Delete the specified community entry.
snmpcommunity del <idx> <Enter>
print: List all SNMP communities and associated permissions.
snmpcommunity print <Enter>