User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 52 of 106 Sept 18, 2008
4.4.2 Link Screen
Click
New Link in the menu to add a new subscriber and choose the wireless parameters.
Figure 26: PMP - Link Configuration Screen
Link Name: Enter a name for this Link (15 characters max.). This Link name is displayed
with the Link ID on information and statistics screens.
Link ID: (Read only) A unique Link ID is generated automatically when a new link is
added.
Peer MAC: Enter the MAC address of the subscriber station. The sector controller only
registers a subscriber station if the MAC address has been entered using the link
configuration screen.
Max. DL Burst Rate: Select the downlink burst rate for unicast traffic from the sector
controller to the subscriber (based on link budget calculations).
Max UL Burst Rate: Select the uplink burst rate for unicast traffic from the subscriber to
the sector controller (based on link budget calculations).
Table 17: PMP Maximum Achievable UBR
Uncoded Burst Rate (Mbps)
SINADR (dB)
54
25
48
23
36
18
24
15
18
11
12
9
9
9
6
7