User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 55 of 106 Sept 18, 2008
4.4.4 Connection Screen
Click
New Connection in the left-hand menu to display a blank Connection configuration
screen. To view an existing Connection, click Groups or Links, and then click Expand to
display the Connections for that Group/link, and then click
Config for the desired
Connection. At least one Connection must be created for each VLAN to be transported
across the wireless switch. The Connection configuration defines how Ethernet packets
are handled on the subscribers. Each subscriber can participate in multiple VLANs.
Figure 28: PMP - Connection Configuration Screen
Connection Configuration
Connection Name: Enter a name for this Connection (15 characters max.). The
Connection name is displayed on configuration and statistics screens.
Connection ID: (Read only) A unique Connection ID is generated automatically when a
new link is created. The Connection ID number is required when assigning this Connection
to a Group.
Connection Tagging Mode: Select the packet processing at the subscriber.
Tagged: Select tagged to associate a unique VID with this Connection. Further
processing is performed at the sector controller based on the Group configuration
associated with this Connection.