User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 65 of 106 Sept 18, 2008
7. Click the Apply button to save and activate these connection settings.
8. Repeat steps 1 - 7 to add a connection for each subscriber station.
Step 4: Save Configuration
Click Save in the left-hand menu to permanently save all settings. The system will pass all tagged
and untagged data and management traffic.
The following table provides sample settings for a pass-though group at the sector controller and
connections to two subscriber stations.
Table 18: PMP - Basic Pass-Through Group Configuration Settings
Group Configuration (SC)
Connection Configuration (SS)
Grou
p
Name
Group
Tagging
Mode
Group
VLAN
ID
Connectio
n Name
Connection
Tagging
Mode
Link
ID
Group
ID
Connectio
n VLAN ID
SC-1
Pass
Through
NA
SS-1
Pass
Through
[L-1]*
[SC-1]*
NA
SS-2
Pass
Through
[L-2]*
[SC-1]*
NA
*The group ID and link ID are numbers generated automatically by the AN-80i.
4.7.2 VLAN Configuration
Use these steps to convert the system from pass-through operation to VLAN tagged connections.
Step 1: Change Group to VLAN Tagged
1. Click Groups to display the Groups Configuration screen.
2. Click Config to edit the Group configuration.
3. Set the mode to Tagged in the Group Tagging Mode field.
4. Enter the VID for this group in the Group VLAN ID field.
5. Click the Apply button to save and activate these settings.
Step 2: Change Connections to VLAN Tagged
1. Click Groups in the menu to display the Groups Configuration screen.
2. Click Expand to view all connections for that Group.
3. Choose a connection and click Config to edit the Connection Configuration.
4. Set the mode to Tagged in the Connection Tagging Mode field.
5. Enter the VLAN ID for this connection in the Connection VLAN ID field.
6. Click the Apply button to save and activate these settings.
7. Repeat steps 1 through 6 for each Connection in the Group.
Step 3: Save Configuration
Click Save in the left-hand menu to permanently save and activate all settings. The system will
now pass only
VLAN tagged traffic.