User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 70 of 106 Sept 18, 2008
Table 27: CLI - get
PTP
PMP
Parameter/Description
√
sinadr: Ration of signal to interference + noise.
√
√
swver: List the downloaded software versions.
√
√
sysuptime: Display the time since the last reboot.
√
√
txpower: Current Tx power setting.
√
ubrate: Current UBR value.
√
wrxpkt: Number of wireless packets received.
√
wrxpktd: Number of wireless packets received that were discarded.
√
wrxpktr: Number of wireless packets that were retransmitted.
√
wtxpkt: Number of wireless packets transmitted.
√
wtxpktd: Number of wireless packets transmitted that were discarded.
√
wtxpktr: Number of wireless packets that were retransmitted.
√
activeids: Number of active IDs.
√
activelinks: Number of the active links.
√
boardtype: Board type.
√
dldpkt: Downlink discarded packets counter.
√
dlrpkt: Downlink Rx packets counter.
√
dltpkt: downlink Tx packets counter.
√
idenable: ID status.
√
lactive: Link active status.
√
ldlblk: Downlink total blocks counter.
√
ldlbr: Downlink burst rate.
√
ldldblk: Downlink discarded blocks counter.
√
ldllfr: Downlink lost frames counter.
√
ldlrblk: Downlink retransmitted blocks counter.
√
ldlrssi: Downlink RSSI.
√
ldlsnr: Downlink SINADR.
√
llostc: Link lost Connection counter.
√
lrcon: Number of link registered Connections.
√
lscode: Link status code.
√
lulblk: Uplink total blocks counter.
√
lulbr: Uplink burst rate.
√
luldblk: Uplink discarded blocks counter.
√
lullfr: Uplink lost frames counter.
√
lulrblk: Uplink retransmitted blocks counter.
√
lulrssi: Uplink RSSI.
√
lulsnr: Uplink SINADR.
√
luptime: Link up-time.
√
regconn: Number of configured Connections.
√
regstations: Number of configured stations.