User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 71 of 106 Sept 18, 2008
Table 27: CLI - get
PTP
PMP
Parameter/Description
√
uldpkt: Uplink discarded packets counter.
√
ulrpkt: Uplink Rx packets counter.
√
ultpkt: Uplink Tx packets counter.
√
werxpkt: Wireless Eth Rx packets counter.
√
werxpktdis: Wireless Eth Rx discarded packets counter.
√
werxpkterr: Wireless Eth Rx packets with errors counter.
√
wetxpkt: Wireless Eth Tx packets counter.
√
wetxpktdis: Wireless Eth Tx discarded packets counter.
√
wetxpkterr: Wireless Eth Tx packets with errors counter.
5.3.8 Load
Use the load command to load an ID table from non-volatile memory.
Table 28: CLI - load
PTP
PMP
Parameter/Description
√
load idtable - Load all IDs from flash memory.
√
load file <server> <name> <mode>
Load saved security keys information from file on FTP server.
<server> IP address of the TFTP server. Files must be stored in the
TFTP server default download directory.
<name> File name on server. File name must be one of the
following:
dsa_key_<mac>.pem DSA key used for SSH.
rsa_key_<mac>.pem RSA Key used for SSH.
ssl_cert_<mac>.pem SSL Certificate.
ssl_key_<mac>.pem SSL Key.
usr_wcert_<mac>.der User wireless certificate.
usr_wkey_<mac>.der User wireless key.
usr_wacert_<mac>.der User wireless authority
certificate.
Where, <mac> is the MAC address of the board.
For example: dsa_key_00-09-02-00-01-02.pem
<mode> Defaults to 'usr' if mode is not specified.
run - Display keys currently in-use.
usr - Display the user-specified keys and certificates.
√
√
load script<server> <name>
Use the script command to load the AN-80i configuration information
from a file (created using script command) from a remote TFTP server.
The file must be located in the TFTP default directory.
<server> - [server IP address]
<name> - [script file name]