User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 79 of 106 Sept 18, 2008
Table 36: CLI - set
PTP
PMP
Parameter/Description
√
√
telnetport: Enter Telnet port address (default is 23).
√
ulqos: Uplink QoS.
<id> - [id number]
<qos> - <QoS>
√
ulrate: Set the uplink rate.
<id> - [id number]
<rate> - <rate>
5.3.17 Show
Use the show command to display system statistics.
show <Enter> Change to 'show' mode.
show [field] <Enter> Display values for the selected parameter.
Table 37: CLI - show
PTP
PMP
Description
√
config: list all system configuration information.
Example:
192.168.25.2(show)# config
System Information:
sysname = 1234567890
sysdescr = b
sysloc = c
syscontact = d
telnetport = 23
snmp = On
snmptraps = On
snmptraplink = On
mgmtag = Off
mgmvid = 0
Ethernet Configuration:
ipaddr = 192.168.25.2
netmask = 255.255.255.0
gateway = 192.168.25.1
flowctrl = Off
sntp = On
sntpip = 192.168.25.1
sntppoll = 24
gmt = +0:00
syslog = Off
syslogip = 192.168.25.1
ethmode = auto
http = On
telnet = On
Wireless Configuration:
rffreq = 5610.0
autoscan = Off maxtxpower = 15
chwidth = 20 MHz
sysmode = pmpsc swver = 10.00.027
(other: 2.00.004)
buzzer = On
regper = 18
maxdst = 2
radio = Off = 2
radio = Off
√
conns: list all Connections.
<id> - [id number]
Example:
192.168.25.2(show)# conns 14
27 SS-001-Data Conn