User's Manual

& User
AN-80i
Manual
70-00072-01-07 Proprietary Redline Communications © 2010 Page 97 of 106 Sept 18, 2008
7.6.2 5.4 GHz Radio: FCC & IC Certified Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 22 dBi. Antennas not included in this list or having a gain greater than
22 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The following table lists FCC and IC certified antennas:
Table 59: Spec. - FCC & IC Certified Antennas: 5.4 GHz Operation
Redline Order
(Part) Number
Gain
(dBi)
Description
App.
Tx Power
Setting (dBm)
A36009MMO
(48-00048-01)
9
360°, 5.0 - 6.0 GHz, omni directional
PMP
13
A12015EAS
(48-00065-00)
15
120°, 4.9-5.9 GHz, sector flat panel
PMP
9
A9016EAS
(48-00066-00)
16.6
90°, 4.9-5.9 GHz, sector flat panel
PMP
7
A6017EAS
(48-00067-00)
17.5
62°, 4.9-5.9 GHz, sector flat panel
PMP
5
A2209MTFD
(48-00021-02)
22
9°, 5.15-5.875 GHz, sector, flat panel
PTP
-1
7.6.3 5.25 - 5.35 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 22 dBi. Antennas not included in this list or having a gain greater than
22 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer. The following table lists
FCC* and IC certified antennas:
Table 60: Spec. - FCC & IC Antennas: 5.25 - 5.35 GHz Operation
Redline Order
(Part) Number
Gain
(dBi)
Description
App.
Tx Power Setting
(dBm)
Tx Peak Conducted
Power (dBm)
Channel Size (MHz)
Channel Size (MHz)
10
20
40
10
20
40
A36009MMO
(48-00048-01)
9
360°, 5.0 - 6.0 GHz,
omni directional
PMP
12
14
N/A
20
21
N/A
A12015EAS
(48-00065-00)
15
120 deg., .9-5.9 GHz,
sector flat panel
PMP
6
8
N/A
21
22
N/A
A9016EAS
(48-00066-00)
16.6
90 deg., 4.9-5.9 GHz,
sector flat panel
PMP
5
7
N/A
21
22
N/A
A6017EAS
(48-00067-00)
17.5
62 deg., 4.9-5.9 GHz,
sector flat panel
PMP
4
6
N/A
20
22
N/A
A2209MTFD
(48-00021-02)
22
9°, 5.15-5.875 GHz,
sector, flat panel
PTP
-4
-2
-1
17
19
20
* FCC regulations require the DFS function be permanently enabled at the factory
and can not be disabled by the installer/end-user when operating in the 5.25-5.35
GHz range.
7.6.4 4.94 - 4.99 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 32 dBi. Antennas not included in this list or having a gain greater than
32 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer. The following table lists
FCC and IC certified antennas: