User manual

RDL-2000 User Manual
70-00143-01-01 Proprietary Redline Communications © 2011 Page 16 of 52 March 9, 2011
Warning to Service Personnel: 48 VDC
Customer equipment including personal computers, routers, etc., must be connected
only to the INPUT (DATA) port on the PoE unit.
Only the outdoors Ethernet interface cable connecting to the RDL-2000 can be safely
connected to the OUTPUT (DATA & POWER) connector. Connecting customer
premises Ethernet equipment directly to the OUTPUT (DATA & POWER) connector
on the PoE power adapter may damage customer equipment.
\\
2.6 RF Jumper Cables
Two RF jumper cables are provided with each RDL-2000 unit. The RF cables conduct
RF signals between the RDL-2000 and the antenna system. Each 75 cm (29.5 in) cable
is terminated female N to BNC.
Figure 5: System - RF Jumper Cable
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]