User manual

RDL-2000 User Manual
70-00143-01-01 Proprietary Redline Communications © 2011 Page 7 of 52 March 9, 2011
1 Important Notices
1.1 Safety and Services
1.1.1 Safety Warnings
1. PoE power adapter for RDL-2000:
Warning to Service Personnel: 48 VDC
Customer equipment including personal computers, routers, etc., must be connected
only to the INPUT (DATA) port on the PoE unit.
Only the outdoors Ethernet interface cable
connecting to the unit can be safely
connected to the OUTPUT (DATA & POWER OUT) connector. Connecting customer
premises Ethernet equipment directly to the OUTPUT (DATA & POWER OUT)
connector on the Power-over-
Ethernet power adapter may damage customer
equipment.
2. Installation of the system must be contracted to a professional installer.
3. The installer and operator are responsible for ensuring that the system is used
exclusively for fixed, point-to point operations.
4. Read this user manual and follow all operating and safety instructions.
5. Keep all product information for future reference.
6. The power requirements are indicated on the product-marking label. Do not exceed
the described limits.
7. Disconnect the power before cleaning. Use only a damp cloth for cleaning. Do not
use liquid or aerosol cleaners.
8. Disconnect power when unit is stored for long periods.
9. The unit must not be located near power lines or other electrical power circuits.
10. The system must be properly grounded to protect against power surges and
accumulated static electricity. It is the user‟s responsibility to install this device in
accordance with the local electrical codes: correct installation procedures for
grounding the unit, mast, lead-in wire and discharge unit, location of discharge unit,
size of grounding conductors and connection requirements for grounding electrodes.
1.1.2 Warning Symbols
The following symbols may be encountered during installation or troubleshooting. These
warning symbols mean danger. Bodily injury may result if you are not aware of the safety
hazards involved in working with electrical equipment and radio transmitters. Familiarize
yourself with standard safety practices before continuing.
Electro-Magnetic Radiation High Voltage
Chapter 1
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]