Installation Manual

RDL-2000 User Manual

Table 9: CLI - Command Summary

the Telnet session.

To upgrade the firmware, the computer hosting the Telnet session must also

have a TFTP server. The firmware file must be located in the TFTP servers

default directory (can not specify a path). When the transfer has completed

successfully, use the switchbanks command to enable the new software

version.

Example: Upload the software binary file abc.brn to the inactive bank on the RDL-2000:

[192.168.25.2] >>: firmware abc.brn

id <id_value>

View or modify the RDL-2000 Master identifier (MU ID). This identifier ensures the

slave established a link only with the designated Master. The identifier is in MAC-

address format.

[blank] - Display current ID.

id_value - Specify the ID for this unit.

Example: Set the RDL-2000 ID to 0050c24f7fd2:

[192.168.25.2] >>: id 0050c24f7fd2

ip <address>

View or modify the RDL-2000 IP address.

[blank] - Display current IP address.

address - Specify the new IP address for this unit.

Example: Set the RDL-2000 IP address to 192.168.20.25:

[192.168.25.2] >>: ip 192.168.20.25

logger <off> <on>

Change the logger settings. When enabled, the logger feature sends all RDL-2000

event messages directly to the screen running the CLI session. All CLI commands

remain available while the logger feature is enabled.

off - Disable the logger.

on - Enable he logger.

Example: Enable the logger:

[192.168.25.2] >>: logger on

mgmtvid <VID>

View or modify the RDL-2000 management VLAN ID setting.

When security is enabled, the RDL-2000 can be managed only using VLAN traffic

tagged with the value specified in the mgmtvid field.

[blank] - Display current VLAN ID.

address - Specify the new VLAN ID for this RDL-2000.

Example: Set the RDL-2000 VLAN ID to 12:

[192.168.25.2] >>: mgmtvid 12

power

View the current RDL-2000 TX power output. When automatic controls are enabled,

the displayed value may be different than the TX Power setting in the Link Manager

Installation->Advanced screen.

Example: Display the current Tx power setting:

[192.168.25.2] >>: power