User's Manual

RDL-2000 User Manual

3.4 Installation Screen - Basic

Use this screen to enter addressing information and monitor the wireless link. Different

information is displayed for the Master and Slave.

Figure 13: Link Mgr - Basic Installation Screen - Master

Figure 14: Link Mgr - Basic Installation Screen - Slave

MAC Address: Hardware (MAC) address of the connected RDL-2000. This address is

also recorded on the RDL-2000 chassis label.

IP Address: IP address for this RDL-2000. The IP address is routable through the

Ethernet port and over the wireless interface.

Note: The default gateway setting can not be viewed or modified by the operator. The

default gateway IP and MAC address is learned automatically during network discovery

following a system rebooted.

Subnet Mask: IP subnet mask.

MU ID: (Slave only) Enter the identification number for this wireless link. The ID structure

is the same format as a MAC address.

A wireless link can be established only between pairs of RDL-2000 systems having

identical ID settings. This feature ensures that following power-up, reboot, and DFS

events, a wireless link is established only between designated pairs of RDL-2000 units.