User's Manual

RDL-3000 User Manual

3.3 PTP Mode

Operation in PTP mode is controlled by the options keys. Enter PTP-only options keys

before deploying and configuring the RDL-3000 units. When a PTP-only options key is

activated, the RDL-3000 operation is restricted to a single point-to-point connection. A

separate range of RF power settings are provided for PTP operation.

The GUI and Telnet functions are identical for PTP and PMP operation. It is required to

configure one unit as the controller (PMP SC) and one unit as a remote (PMP SS). The

graphical user interface (GUI) and Telnet functions are identical for both PTP and PMP

operation.

Note: Refer to the RDL-3000 installation Guidelines for additional information about

installing and operating the RDL-3000 in PTP mode.

Fig. 23: PTP - RDL-3000 PTP Mode Configuration