User's Manual

RDL-3000 User Manual
70-00158-01-DRAFT Proprietary Redline Communications © 2011 Page 98 of 150 November 25, 2010
Upgrade Steps
Important; The RDL-3000 firmware binary file must be located in the default upload
directory of the TFTP/FTP server.
1. Login to the RDL-3000 Web interface and click Utilities -> Firmware in the main
menu.
2. Select TFTP or FTP, enter the IP Address of the server, and enter the full name of
the binary file (including the .bin extension). If FTP is selected, enter account name
and password.
3. Click Upload File to begin the file transfer. The transfer may require up to eight
minutes based on the data transfer rate. Do not interrupt the transfer process.
When the transfer is complete, the RDL-3000 checks the integrity of the uploaded file
and registers a status message in the event log. If errors were introduced during the
transfer process, the firmware file is discarded and the upload must be repeated.
4. When the transfer has completed successfully, click the Change Version button to
select the firmware version to load on the next system reboot.