User's Manual

RDL-3000 FAMILY RDL-3000-RMD PRODUCT MANUAL
70-00184-06-00c Proprietary Redline Communications © 2014 Page 10 of 20 January 16, 2013
4 Final Product Requirements
The following requirements apply to all final products incorporating the modules.
4.1 Deployment in the United States
4.1.1 Frequency Bands
Operation of the final product requires an FCC specific software 'key' that is available
exclusively from Redline. This key restricts device operation to the FCC 3650-3700 MHz
band. The professional installer and operator can not modify or otherwise circumvent
these operational restrictions.
4.1.2 Antenna Use and Transmit Power
FCC regulation part 90.1321 (governing operation in the 3650-3700 MHz band in the
US) states that base station transmissions are limited to a maximum transmit power of 1
Watt/MHz (peak EIRP). If the antenna gain exceeds the allowed maximum for any
Bandwidth/Frequency combination (see following tables), the power setting must be
reduced by the same amount (dB) that the antenna gain exceeds the allowed maximum.
4.1.3 Certified Antennas
This device has been designed to operate with the antennas listed in the following table.
Any additional antennas will be used only after authorization is obtained through Class II
permissive change.
Table 1: FCC - Approved Antennas
Mfgr.
Part #
Mode
Frequenc
y Range
Gain
(dBi)
Size
Polarization
Redline
AFS-DBG-03120-01
Sectoral
3.3-3.8
14
2 ft (60 cm)
Dual
Redline
AFS-DBG-0360-01
Sectoral
3.3-3.8
15.5
2 ft (60 cm)
Dual
Redline
AFS-DBG-0390-01
Sectoral
3.3-3.8
15
2 ft (60 cm)
Dual
Redline
30-00328-40
Terminal
3.3-3.8
14
8 in (20 cm)
Dual