User's Manual

RDL-3000 FAMILY RDL-3000-RMD PRODUCT MANUAL

Federal Communications Rules for Operation in USA

FCC Part 90 guidelines for deployment of RDL-3000-RMD systems in the frequency

band of 3650-3700 MHz for “restricted” CBP (Contention Based Protocol) in USA

includes restrictions on the maximum EIRP.

To comply with these guidelines, the following EIRP limitations are applied for

deployment in this band:

i) Max EIRP of 25 Watts/25 MHz (equivalent to 1 Watt/1 MHz)

ii) Peak EIRP Power Density of 1 Watt in any 1 MHz slice of spectrum.

To ensure compliance with these restrictions, refer to the following important notices:

1. The 3650-3700 MHz frequency range is a licensed band in the USA and operators

must have a valid spectrum license to operate RDL-3000-RMD equipment using this

band.

2. The RDL-3000-RMD requires a Redline FCC-specific options key that is mandatory

for operation within the USA. This options key enforces the FCC approved operating

range of 3650-3700 MHz.

3. The RDL-3000-RMD outdoor transceiver and antenna must be professionally

installed.

4. Changes or modifications not expressly approved by Redline Communications could

void the user’s authority to operate the equipment.

5. Do not operate an RDL-3000-RMD outdoor transceiver until you have confirmed the

FCC specific options key is loaded and active (operating range restricted to 3650-

3700 MHz). When the FCC-specific options key is installed, the operator is not able to

set an RF frequency that exceeds the allowed range.

6. The RDL-3000-RMD transmit power settings must not exceed values stated in the

RDL-3000 Family User Manual.