User's Manual

RDL-3000 RMC/E/F MODULE PRODUCT MANUAL

3.3 Professional Installation

Devices containing the module require professional installation. It is the responsibility

of the installer to understand the product operation by attending training as required,

reading and understanding the product documentation, and ensuring that all building,

safety and regulatory codes are met and the installation is complete and secure.

3.4 Safety Precautions

Installation and service of the module must be performed by personnel having technical

training and experience necessary to be aware of hazards during installation and/or

service of RF equipment. The installation and/or service must be done using procedures

designed to minimize any danger to technical personnel or any other person.

3.5 Radio Frequency Safety

The installer of this radio equipment must ensure the antenna is located or pointed such

that it does not emit RF fields in excess of the general population limits as defined by:

FCC CFR 47, Part 2.1091

http://www.gpo.gov/fdsys/pkg/CFR-2009-title47-vol1/pdf/CFR-2009-title47-vol1-sec2-

1091.pdf

FCC OET Bulletin 65, Radio frequency radiation exposure evaluation for fixed

devices

http://transition.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65

/oet65c.pdf

Health Canada limits for the general population; consult Safety Code 6, obtainable

from Health Canada’s website:

http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct-eng.php

Refer to the regulatory statements included in this document.