User's Manual

RDL-3000-RMG PRODUCT MANUAL
70-00184-04-01 Proprietary Redline Communications © 2013 Page 34 of 39 May 16, 2013
(2) This device must accept any interference received, including interference that
may cause undesired operation.
5. FCC Information to Users @ FCC 15.21:
Warning: Changes or modifications not expressly approved by Redline
Communications could void the user’s authority to operate the equipment.
FCC Recommendations to UNII band Users
Redline, in complete cooperation with the FCC, instructs professional installers and
operators of this equipment in the UNII band to follow these guidelines.
Review Table 3: Notice - FCC - TDWR System Locations to determine if the intended
deployment location is near a TDWR site.
1. Operation in the TDWR band of 5600-5650 MHz is not permitted. The equipment
does not allow the operator to use Web, CLI, or SNMP to set a frequency that
overlaps this range.
2. Operation in the 5570-5680 MHz band (excluding 5600-5650 MHz) is permitted
beyond 35 km (22 mi) AND not in line-of-sight of a TDWR site.
3. Operation in the 5570-5680 MHz band (excluding 5600-5650 MHz) within 35 km (22
mi) OR in line-of-sight of a TDWR site is allowed by observing a 30 MHz upper and
lower guard band on the operational frequency of the nearby TWDR station.
For example, if the nearby TDWR is Miami (5605 MHz), the base station frequency
setting must exclude channels with center frequencies from 5575 MHz (30 MHz
below 5605) to 5635 MHz (30 MHz above 5605).
It is recommended that the operator register in the voluntary WISPA sponsored
database. Go to the www.wispa.org website and click on TDWR to view more
information and register in the online database.
Frequency selection is regulated by a regional code integrated into each options key.
This feature enforces compliance to regional regulatory statutes. Each options key is
keyed to the unique MAC address of an RDL-3000 radio platform. Options keys can be
generated only by Redline and its authorized agents. End-users can not generate or
modify options keys (to obtain or alter regional codes).
Redline provides technical training programs and information covering network design
and installation for Redline distributors, value added resellers, installers, and other
partners. This program is intended in part to train participants to a level of understanding
where they are competent to order, setup and configure the Redline wireless equipment
to be in compliance with regulatory requirements in the region where this equipment is
installed. Redline sales order processing is also trained to verify that regional codes are
consistent with the intended deployment location as documented in the sales order.
Table 66: FCC: RDL-3000-RMG TDWR System Locations
STATE
CITY
LONGITUDE
LATITUDE
FREQUENCY
TERRAIN
ELEVATION
(MSL) [ft]
ANTENNA
HEIGHT
ABOVE
TERRAIN
[ft]
AZ
PHOENIX
W 112 09 46
N 33 25 14
5610 MHz
1024
64
CO
DENVER
W 104 31 35
N 39 43 39
5615 MHz
5643
64
FL
FT LAUDERDALE
W 080 20 39
N 26 08 36
5645 MHz
7
113
FL
MIAMI
W 080 29 28
N 25 45 27
5605 MHz
10
113
FL
ORLANDO
W 081 19 33
N 28 20 37
5640 MHz
72
97