Application Guide

redlinetools.com
800.791.7542
219
Endmills - Technical Info
Endmills
Tech Info -
Corner Rounding Endmills Speeds & Feeds
Material Grades SFM
P - Steels
High Strength Tool Steel A2, D2, P20, H11, H13, S2, 01 80-90
Low Carbon
A36, 12L14, 12L15, 1005, 1018, 1020, 1108-1119, 1213-1215, 1513-1518, 4012. 5015,
9310
180
Medium Carbon
1040-1095, 1140-1151, 1330-1345, 1520-1572, 4023-4063, 4120-4161, 4330-4340,
4620-4640, 8620-8660, 8740-8750, 6150, 51000, 52100
170
M- Stainless Steels
Austenitic 301-304L, 310, 316L, 321, 347 100
Martensitic 403, 410, 416, 420, 430, 431, 440 110
Precipitation Hardening 12/8, 15/5, 17/4, AM-350/355/363, PH13-8MO, PH14-8/MO 120
K - Cast Irons
Ductile A536, J434, 60-40-18 180
Gray A48, A436, A319. Class 20, G4000 140
Malleable A220, A602, J158 100
N - Non-Ferrous
Aluminum Alloys 2014, 2024, 6061, 7075 300
Aluminum High Silicon A380, A390 300
Brass/Bronze Aluminum Bronze, Low Silicon Bronze 230-250
Composites G-10, Fiberglass, Graphite, Graphite Epoxy, Plastics 180-200
Copper 100-200
Magnesium 300
S - High Temp Alloys
Cobalt Base Stellite, HS-21, Haynes 25/188, X40, L605 80
Iron Base Incoloy 800-802, Multmet N-155, Timkin 16-25-6, Carpenter 22-b3 80
Nickel Base
Inconel 625/718, Inco 700, 713C, 718, Monel 400-401, 404, K401, Rene, Rene 41 & 95
Hastelloy, Waspoloy, Udimet 500 & 700
80
Titanium Commercially Pure, 6Al-4V, ASTM 1/2/3, 6Al-25N-4Zr-2Mo-Si, Ti-8Al-1Mo, Ti-8Al-4Mo 90
NOTE: Speeds and Feeds listed are estimated and will vary by application.
These General Purpose tools can be found on pages 175-179.