Schematics

MORLAB
SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.
FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China
Tel: [phone] Fax: [phone]
Http://www.morlab.cn E-mail: [e-mail]
Page 112 of 173
REPORT No.：SZ21020185W03
2.8.3. Test Procedure
KDB 558074 Section 8.6 and 8.7 was used in order to prove compliance.
2.8.4. Test Result
The lowest and highest channels are tested to verify Restricted Frequency Bands.
The measurement results are obtained as below:
E [dBμV/m] =U
R
+ A
T
+ A
Factor
[dB]; A
T
=L
Cable loss
[dB]-G
preamp
[dB]
A
T
: Total correction Factor except Antenna
U
R
: Receiver Reading
G
preamp
: Preamplifier Gain
A
Factor
: Antenna Factor at 3m
Note: Restricted Frequency Bands were performed when antenna was at vertical and horizontal
polarity, and only the worse test condition (vertical) was recorded in this test report.
802.11b Mode
A.Test Verdict:
Channel
Frequency
(MHz)
Detector
Receiver
Reading
U
R
(dBµV)
A
T
(dB)
A
Factor
(dB@3m)
Max.
Emission
E
(dBµV/m)
Limit
(dBµV/m)
Verdict
PK/ AV
1 2383.33 PK 27.53 6.74 27.20 61.47 74 PASS
1 2390.00 AV 15.02 6.74 27.20 48.96 54 PASS
11 2489.32 PK 26.97 6.74 27.20 60.91 74 PASS
11 2485.29 AV 15.44 6.74 27.20 49.38 54 PASS