Hedge-Trimmers Owner's/Operator's Manual

US-4
CHT2250
3. Warning labels on the machine
For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER
(1) Read owner's manual before operating
this machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly
could result in accidents causing
serious injury or death. Read this
manual carefully and practice using the
hedge-trimmer until you are fully
acquainted with all operations and
have learned to use it correctly.
(4) This is extremely sharp and can easily
cause cuts.
If warning label peel off or become soiled and
impossible to read, you should contact the
dealer from which you purchased the
product to order new labels and affix them in
the required location(s).
Never modify your hedge trimmer.
We won’t warrant the machine, if you use
the remodeled hedge trimmer or you don’t
observe the proper usage written in the
manual.
WARNING
IMPORTANT
4. Symbols on the machine
*1: The year will be changed every year of manufacturing.
*2: The initial number will be changed every year of
manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
■ EMISSION CONTROL
An emission control label is located on the machine.
USE JASO FD OR ISO L-EGD GRADE 50:1 OIL
MANUFACTURED:
THIS ENGINE MEETS U.S. EPA AND CALIFORNIA
EXH/EVP REGS FOR 2009*
1
S.O.R.E.
ENGINE FAMILY : 9HQZS.0234BM*
2
DISPL.: 23cc
EMISSION CONTROL SYSTEM : EXH;EM/EVP;SP*
3
COMPLIANCE PERIOD : 50 HOURS
REFER TO OPERATOR'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
EMISSION CONTROL INFORMATION
ZENOAH AMERICA INC.