Specifications

7
Operation
• Avoid pulling the rope to its end or
returning it by releasing the knob.
Such actions can cause starter
failures.
• Move the choke lever to the OFF
position and restart the engine
(OP2)
• Allow engine to warm up for several
minutes.
1. When restarting the engine
immediately after stopping it, leave
the choke in the off position.
2. Over choking can make the engine
hard to start due to excess fuel.
_ ADJUSTING THROTTLE CABLE (OP5)
• The normal play is 1 or 2mm when
measured at the carburetor side
end. Readjust with the cable
adjuster as required. (OP5)
(1) cable adjuster
_ ADJUSTING IDLING SPEED (OP6)
• When the engine tends stop
frequently at idling mode, turn the
adjusting screw clockwise.
(1) idle adjusting screw
• Warm up the engine before
adjusting the idling speed.