Workshop Manual

9
STRATO CHARGED ENGINE GZ25N
5. SPECIAL TOOLS
Part name Part No. External appearance Usage

4 Air Gap Gauge 3350-96240 To set ignition coil.
To remove / install piston
pin.
3 Rod Assy 1101-96220
To hold crankshaft when
disassembling /
assembling clutch and
rotor.
2 Piston Stopper 4810-96220 

1 Puller Assy 2890-96100 To remove rotor.
8 Drum Remover 5500-96120 To remove clutch drum.
9 Snap Ring Guide 5500-96130 To install clutch drum.
10 Snap Ring Push 5500-96140 To install clutch drum.
Guide
For socket screw of
Hex.3mm,4mm and 5mm.
5 Hex Wrench 3304-97611
To remove / install recoil
pulley
6 Puller 4500-96100
7 Snap Ring Pliers 5500-96110 To remove snap ring.