Workshop Manual

STRATO CHARGED ENGINE

GZ25N

6. SERVICE GUIDE

6-8 Laying of Switch Cable

Fit the lead wires with the clips on the side of the

coil. Confirm that they do not touch with the rotor.

6-9 Fitting of Plug Cap

Insert the guide of the plug cap into the engine

cover securely.

Caution:

Check that the plug cap is not deteriorated, stiffened,

nor has cracks.

Also check that there is no play after fitting the cap.

6-10 Removing Piston Pin

Remove snap rings from both sides of the piston

pin.

Engage the rod assy (1101-96220) to the piston

pin and gently tap with a plastic hammer to push

out the pin.

Caution:

Hard hammering may damage the big end of the

connecting rod.

Red

Black

Clip

Coil

Engine Cover

Plug cap guide

Plastic Hammer

Rod Assy

Pisto