Technical data

EXPLOSIONPROOF
RedMax - ... - Y
RedMax - ... - YF
RedMax - ... - CTS
RedMax - ... - VAS
www.schischek.com
Schischek GmbH Germany, Muehlsteig 45, Gewerbegebiet Sued 5, 90579 Langenzenn, Tel. [phone], Fax [phone], E-Mail [e-mail]
RedMax-S-Y_en
V01 – 4-Feb-2015
Subject to change!
Compact. Easy installation. Universal. Cost effective. Safe.
Product views and applications
Description Highlights
Ball valve Throttle valveSafety damper
Electrical, explosion proof rotary actuators
3-pos. / 0...10 VDC / 4...20 mA control mode, with feedback, 24...240 VAC/DC, 95° angle of rotation
5/10 Nm, 15/30 Nm without and 5/10 Nm, 15 Nm with safety operation (spring return)
ATEX tested in acc. with directive 94/9/EC for zone 2, 22
Type Torque Supply Motor running time Spring return Control mode Feedback Wiring diagram
RedMax- 5.10 - Y 5 / 10 Nm 24...240 VAC/DC 7,5 / 15 / 30 / 60 / 120 s/90° – 3-pos., 0...10 VDC, 4...20 mA 0...10 VDC, 4...20 mA SB 5.0 – 5.3
RedMax-15.30 - Y 15 / 30 Nm 24...240 VAC/DC 7,5 / 15 / 30 / 60 / 120 s/90° – 3-pos., 0...10 VDC, 4...20 mA 0...10 VDC, 4...20 mA SB 5.0 – 5.3
RedMax- 5.10 - YF 5 / 10 Nm 24...240 VAC/DC 7,5 / 15 / 30 / 60 / 120 s/90° 3 or 10 s / 90° 3-pos., 0...10 VDC, 4...20 mA 0...10 VDC, 4...20 mA SB 5.0 – 5.3
RedMax- 15 - YF 15 Nm 24...240 VAC/DC 7,5 / 15 / 30 / 60 / 120 s/90° 3 or 10 s / 90° 3-pos., 0...10 VDC, 4...20 mA 0...10 VDC, 4...20 mA SB 5.0 – 5.3
RedMax- ... - CTS Types as above with aluminium housing and seawater resistant C5-M painting (cable glands brass nickel-plated)
RedMax- ... - VAS Types as above with stainless steel housing for aggressive ambient (cable glands brass nickel-plated)
RedMax ¼ turn actuators – size S
► For all type of gas, mixtures, vapours and dust for use in zone 2 and 22
► Universal supply unit from 24…240 VAC/DC
►5 different motor running times 7,5–15–30–60–120 s/90°, adjustable on site
► 2 different spring return running times ~ 3–10 s/90°, selectable on site
► 3-pos. and 0...10 VDC, 4...20 mA control mode with or without spring return function
► Feedback signals 0...10 VDC and 4...20 mA
► Reverse function
► 5–10 –15– 30 Nm actuators in the same housing size
► 100 % overload protected and self locking
► Compact design and small dimension (L × W × H = 210 × 95 × 80 mm)
► Direct coupling to the damper shaft with double square connection 12 × 12 mm
► 95° angle of rotation inclusive 5° pretension
► Robust aluminium housing (optional stainless steel + seawater resistant C5-M painting)
► IP66 protection
► Simple manual override included + preparation for comfortable manual override
► Gear made of stainless steel and sinter metal
► Weight only ~ 3,5 kg
► Integral heater for ambient temperatures down to −40 °C
► Integral safety temperature sensor
► Integral equipment for manual adjustment (push button, lamp, switch)
► Preparation for adaptable and adjustable auxiliary switches type ...Switch
► Wide range of accessories
The RedMax actuators are a revolution for safety, control and shut-off
dampers, VAV systems, ball valves, throttle valves and other motorized
applications for HVAC systems in chemical, pharmaceutical, industrial
and offshore/onshore plants, for use in Ex-areas zone 2 (gas) and zone
22 (dust).
Highest protection class (ATEX) and IP66 protection, small dimensions,
only 3,5 kg weight, universal functions and technical data, an integrated
heater and an optional stainless steel housing guarantee safe operation
even under difficult environmental conditions. High quality brushless
motors guarantee long life.
All actuators are programmable and adjustable on site. Special tools or
equipment are not required. Motor running times and torques as well as
spring return times, according to the actuator type, are selectable or
adjustable on site. The integrated universal power supply is self adaptable
to input voltages in the range of 24...240 VAC/DC. Furthermore it is
possible to perform control signal inverting and compulsion control by
certain connections. The actuators are 100 % overload protected and
self locking.
...Max-...-YF actuators are equipped with spring return fail safe function.
Standard shaft connection is a double square direct coupling with
12 × 12 mm.
Different accessories are available to adapt auxiliary switches, terminal
boxes or adaptions for ball valves and throttle valves and other armatures.
1 / 4