User's Manual
Table Of Contents
- VisioNize® pipette manager
- Table of contents
- 1 Operating instructions
- 2 Safety
- 3 Product description
- 4 Installation
- 5 Operation
- 6 User administration
- 7 Troubleshooting
- 8 Maintenance
- 9 Technical data
- 10 Transport, storage and disposal
- 1 Other applicable documents
- 2 Checking the delivery package
- 3 Product description
- 4 Installation
- 1 Regulatory information
- 2 EU compliance statement
- 3 FCC compliance statement
- 4 ISED Canada compliance statement
- 5 Radiofrequency radiation exposure Information
- 6 Technical data
Operation
VisioNize
®
pipette manager
English (EN)
Qualified
21
5Operation
5.1 Switching the control panel on or off
The control panel can only be switched on or off at the mains/power plug.
5.2 Operating the user interface
5.3 Creating a liquid type
5.3.1 With preset parameters
The appropriate parameters for the selected liquid type have been preset.
1. Call the Liquid Manager.
2. Tap on the New button.
3. Select the liquid type Volatile, Viscous or Foam.
4. Follow the instructions on the screen.
5.3.2 With freely selectable parameters
All the parameters have to be set manually.
Parameters to be set:
• Pre-wetting steps
•Aspiration speed
• Dispensing speed
• Name, description and short symbol (appears on the pipette display)
1. Select the Menu > Liquid Manager menu.
2. Tap on the New button.
3. Select the liquid type Custom.
4. Follow the instructions on the screen.
The touch screen is designed to be operated with your fingers only without the
need for tools. You can wear laboratory gloves made of nitrile or latex.
Alternatively, you can also use a stylus, for example, when thick gloves need to
be worn in the laboratory.
If liquid comes into contact with the touch screen, the functions displayed on the
touch screen may be triggered.
Do not drop any liquids onto the touch screen.
Do not spill any liquids onto the touch screen.