Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 136
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
Example:
ANT_SEL_VALUE=2
The above line selects the internal antenna. The Operation starts on this antenna.
If antenna diversity selection feature is also enabled, initial operation will start on the antenna selected. Antenna
diversity operation will continue as expected.
This radio transmitter 8407A-M7DB6 has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater
than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Cet émetteur radio8407A-M7DB6 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne
énumérés ci-dessous avec le gain maximal admissible indiqué. Les types d'antennes non inclus dans cette liste, ayant
un gain supérieur au gain maximal indiqué pour ce type, sont strictement interdits pour une utilisation avec cet
appareil.
Antenna 1
Antenna 2
Brand
Redpine
Taoglas
Model
RSIA7
GW.71.5153
Type
PCB Trace Antenna
Dipole Antenna
Gain
2.4G: 0.712 dBi
5G: 1.25 dBi
2.4G: 3.3 dBi (Straight)/ 3.8 dBi
(Bent)
5G: 4.9 dBi (Straight)/ 5.5 dBi (Bent)
29.3.1 COEX Mode selection
This variable is used to select the Coex mode in which the module has to operate. The following are the possible values:
1 - WLAN STATION /WIFI-Direct/WLAN PER
2 - WLAN ACCESS POINT (including multiple APs on different vaps)
3 - WLAN ACCESS POINT + STATION MODE (on multiple vaps)
4 - BT CLASSIC MODE/BT CLASSIC PER MODE
5 - WLAN STATION + BT CLASSIC MODE
6 - WLAN ACCESS POINT + BT CLASSIC MODE
8 - BT LE MODE /BT LE PER MODE
9 - WLAN STATION + BT LE MODE
12 - BT CLASSIC + BT LE MODE
13- WLAN STATION + BT CLASSIC MODE+ BT LE MODE
14 - WLAN ACCESS POINT + BT CLASSIC MODE+ BT LE MODE
16 - ZIGBEE MODE/ ZIGBEE PER MODE
17 - WLAN STATION + ZIGBEE
32 - ZIGBEE COORDINATOR
48 - ZIGBEE ROUTER
Example:
COEX_MODE=3
The above line sets the module to operate in WLAN AP + STA concurrent mode.