Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 140
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
ctrl_interface=/var/run/wpa_supplicant
update_config=1
network={
ssid="REDPINE_AP_CCMP"
pairwise=CCMP TKIP
group=CCMP TKIP
key_mgmt=WPA-PSK
psk="12345678"
proto=WPA2 WPA
bgscan="simple:10:-45:100"
priority=1
}
31.1.2 Configure Connection quality monitoring (cqm ) rssi and hysteresis using iw command
To know more about iw tool, refer to the section Configuration Using CFG80211.
$iw dev <devname> cqm rssi <threshold|off> [<hysteresis>]
Set connection quality monitor RSSI threshold.
Example:
$iw dev wlan0 cqm rssi -45 4
When finished, execute the commands given in the chapter Wi-Fi ioctl Usage Guide-->>Enable Background Scan and Set
Parameters (only in Client mode).
To know more about Background Scan and Set Parameters, refer to the section Background Scan Parameters.