Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 50
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
Create a VAP The
OneBox-Mobile
software allows
creation of 4 VAPs
<listen_interval_duration> <num_beacons_per_listen_interval> <dtim_interval_duration>
<num_dtims_per_sleep>
Example
The command below enables ULP Power Save Mode for a duration of 100 ms and with a
listen_interval_duration of 100ms.
# ./onebox_util rpine0 set_ps_params 1 2 0 0 0 0 0 100 100 0 0 1
Enable UAPSD
(Normal and Mimic
modes) and Set
Parameters
Description
This command is used to enable the UAPSD mode and set the relevant parameters. If the Access
Point does not support UAPSD, the module tries to mimic this mode. Refer to the section Power
save Modes, Profiles and Parameters for more details.[1]
Default Value
-
Input Parameters
Base Interface (string like rpine0)
UAPSD Wakeup Period in milliseconds – 0 for Transmit Based UAPSD and between 10 and 100 for
Periodic UAPSD.
UAPSD Service Period Length- This field indicates number of packets delivered by AP to station after
receiving one trigger frame. This filed value ranges between 0-3 as described below.
0-All buffered packets will be delivered.
1-Two buffered packets will be delivered.
2-four buffered packets will be delivered.
3-six buffered packets will be delivered.
Output Parameter
None
Reset Required
No.
Usage
# ./onebox_util <base_interface> set_uapsd_params 0xF <sp_len> <uapsd_wakeup_period>
Example
The command enables UAPSD mode and sets the wakeup period as 100ms.
# ./onebox_util rpine0 set_uapsd_params 0xF 0 100
Note: The set_uapsd_params command needs to be followed by the command given below for the
values to take effect.
# ./onebox_util <base_interface> reset_adapter
Reset Adapter (only
in Client mode)
Description
This command is used to reset the Client mode virtual interface. This command can be used to
change certain configurations of the Client mode and reset the VAP for the configurations to take
effect.
Default Value
-
Input Parameters
Base Interface (string like rpine0) – the base interface input ensures that the Client mode VAP is
reset irrespective of the actual VAP name.
Output Parameter
-
Reset Required
-
Usage
/onebox_util <base_interface> reset_adapter
Example
/onebox_util rpine0 reset_adapter