Reference Manual

Redpine Signals, Inc. Proprietary and Confidential Page 96
RS9116 n-Link Linux and Android
Technical Reference Manual
Version 2.0
The above command starts continuous wave transmission with the following configuration.
Channel number – 6
Type – Single tone
Transmit Power – 2dBm
The command used for stopping continuous wave transmission is outlined below:
#. /onebox_util rpine0 cw_mode 6 2 2
The command used for starting transmission in 184(11J ) channel is outlined below:
#. /onebox_util rpine0 cw_mode 184 1 2
The command used for stopping the transmission is outlined below:
#. /onebox_util rpine0 cw_mode 184 2 2