User Manual

Redpine Signals, Inc. Proprietary and Confidential Page 16
User Manual
Version 1.2.1
Performance Test mode.
Default Value 0
Input Parameters Base Interface (string like rpine0)
Integer value mapped as follows:
3- Antenova Antenna
Output Parameter None
Reset Required No
Usage #
./onebox_util<base_interface>ant_type<a
ntenna_type>
Example The command below sets the Antenna type
to Fractus Antenna for Wi-Fi:
# ./onebox_util rpine0 ant_type 3
Table 5: Command to Program Antenna Type for Wi-Fi
4.2 Commands to Program Transmit Power
4.2.1 Command to Program Transmit Power for Wi-Fi
Description This command is used to program the
transmit power of the module for Wi-Fi. If
the value of transmit power exceeds the
maximum allowed power supported by the
channel specified by the regulatory domain,
then the minimum of the two values will be
used.
Default Value -
Input Parameters VAP Name (string like wifi0, wifi1, etc.)
Integer value in dBm
Output Parameter None
Reset Required No.
Usage #
iwconfig<vap_name>txpower<val_in_dBm
>
Example The command below sets the Wi-Fi