User's Manual

SIM™ User Manual | Ref Code: SUM | GEN4_0024| Version: 8
6
General Warnings Related to System Installation
WARNING
 The SIM™ system must be installed as per the instructions in section 11.0 SIM™ Installation,
Maintenance and Disposal of this user manual.
 The SIM™ system must not be installed in an environment that limits or prohibits RF transmitting
devices.
 Do not connect items which are not specified as part of the SIM™ system.
 The SIM™ pod, SIM™ dock and SIM™ sensor most not be stored or placed close to radiant heat
sources, such as a lit fireplace.
 The SIM™ pod, SIM™ dock and SIM™ sensor must not be stored or placed close to sources of steam,
such as steam kettles.
 The SIM™ pod, SIM™ dock and SIM™ sensor must not be stored or placed close to microwave ovens.
 Do not make changes to the SIM™ system database (stored on the server used for SIM™) as these may
render the system inoperable.
Warnings Regarding Maintenance
WARNING
 The SIM™ pod should be inspected for damage to the case and clip after every assessment and not
less frequently than every 12 weeks.
 Never use any component or accessory of the SIM™ system that appears to be damaged or not
functioning correctly. If any signs of damage or malfunction are evident, discontinue use and contact
Simavita.
 If you cannot determine the cause of the problem with any component or accessory of the SIM™
system, contact Simavita. Do not use the SIM™ system until the problem has been corrected.
 Do not attempt to repair, modify or service any component or accessory of the SIM™ system. The
system does not contain any user serviceable parts. Doing so might cause damage and/or void your
warranty. Only qualified service personnel should attempt to repair the SIM™ system.
 Only clean SIM™ components with cleaning agents specified in this manual. Read and follow the
cleaning instructions and additional instructions (section 10.0 SIM™ cleaning instructions) on the
cleaning agents, to clean the SIM™ components.
 The SIM™ sensor and SIM™ pants are intended for single use. Use these only as per Simavita’s
instruction and do not attempt to wash or reuse these components.
 Only perform upgrades to any software components of the SIM™ system by following instructions
provided by Simavita and using official software installation packages or as directed by an authorized
Simavita representative.
 The SIM™ pod safety circuit may be triggered during the cleaning process. The SIM™ pod should
always be placed on a powered SIM™ dock for a few moments after cleaning to reset the safety circuit.
 Never use accessories, detachable parts or materials that are not described in this User Manual. To
order new accessories contact Simavita.
 The SIM™ pod must not be serviced or maintained when in use on a Resident