User's Manual

SIM™ User Manual | Ref Code: SUM | GEN4_0024| Version: 8
140
SECTION C – CONFIGURING SIM™ FOR FIRST USE
1. The SIM™ configuration tool is a set of web pages installed as part of SIM™ setup.
2. The tool should be accessed from a client machine which resides on the same subnet as the server.
3. The configuration tool is tested and supported on Internet Explorer 10 as it has specific HTML5
requirements.
4. In the browser window, type in the following URL corresponding to the server running the SIM™
software. For example, use http://192.168.0.18:8080 to access the SIM™ configuration tool (change
to your IP address as required). Specifying the port number is important. If SIM™ configuration is run
from the server, then use http://localhost:8080.
5. The following screen will appear.
SECTION C1 (OPTIONAL) SIM™ POD LIBRARY INSTALLATION
This is required only if SIM™ pods need to be configured or programmed.
 From the link provided on the screen (as highlighted in the figure above), download the SIM™ pod
libraries installation file and save it (you may need to choose the “Save as” option).
Note,
This file is only required if you are configuring SIM™ pods. If you are not configuring SIM™ pods, the download
and installation of the SIM™ pod libraries can be skipped.
 Install the SIM™ pod libraries by right-clicking on the downloaded .exe file and selecting ‘Run as
Administrator’ (note that this is the default even if the file is double-clicked on). Follow the on-
screen prompts to complete the installation.
Note:
The SIM™ pod libraries only need to be installed on the client computer used to configure the SIM™ pod
hardware and is not required to install this software component if SIM™ pods are not being configured.