User's Manual

SIM™ User Manual | Ref Code: SUM | GEN4_0024| Version: 8

3.2 Connect SIM™ pod to SIM™ sensor

To connect the SIM™ pod to the SIM™ sensor, follow these steps:

Step 1

Check that the pod number on the back of the SIM™ pod

matches the number allocated for that SIM™ assessment.

Step 2

Remove the SIM™ sensor from its sealed bag by tearing

the top of the bag at the pre-cut notch.

Step 3

Connect the SIM™ pod to the SIM™ sensor; match the

window in the sensor clip to the raised shape on the SIM™

pod, then hook the clip over the pod.

Step 4

Press firmly down on the end of the clip, until a click is

heard. Green lights will flash briefly across all three

indicator symbols to confirm the SIM™ pod is connected

successfully.

Note:

 If the SIM™ pod connection is unsuccessful the lights

flash green then turn orange briefly across all three

indicator symbols. You will need to repeat the

connection process.

 If the battery is low the battery indicator light will flash

orange indicating the pod needs to be recharged.

 If the SIM™ pod memory is almost full, the

synchronising indicator light flashes orange and must

be returned to the SIM™ dock.