User Manual

12
Onebox-Mobile
PHY Evaluation Test Utility
User Guide for Linux
Channel numbers in 5 GHz are ranging from 36 –165. The following
tables map the channel number to the actual radio frequency in the 5
GHz spectrum for 20MHz channel width.
Channel
Numbers (5GHz)
Center Frequencies
for 20MHz Channel
Width (MHz)
36
5180
40
5200
44
5220
48
5240
149
5745
153
5765
157
5785
161
5805
165
5825
Table 2 Channel Number and Frequencies for 20MHz Channel Width in 5GHz
Set External PA enable/disable:
If the module contains an external PA, to enable the usage of the PA,
enter a value of 1, else enter a value of 0. This support is currently not
handled in driver.
Set Rate flags:
Rate flags contain short GI, Greenfield and channel width values. Various
fields in rate flags are divided as specified below
Fields
Short GI
Greenfield
Channel
Width
Reserved
Bits:
0
1
2 – 4
5 - 15
Table 3 Rate Flags
To enable short GI – set rate flags value as ‘1’
To enable Greenfield – set rate flags value as ‘2’
To set channel width use one of the values specified in the table below: