Installation Manual

Redpine Signals, Inc. Proprietary and Confidential Page 12
User Manual
Version 2.0.0
3 Instructions for integration of the host module
The user has to follow the final design are as per the Redpine
recommendation. Below are the points to follow
3.1 Trace layout and dimensions:
Trace
1) Trace Width :: 15.1 mil
2) Trace Length :: 403 mil
3) Trace to Copper gap :: 23.6 mil
4) Trace Impedance :: 50 ohm
5) Used an inductor and capacitor to match 50 ohm.
6) Below image shows the front end circuit
3.2 Manufacturer and specifications:
1) Resistor value :: 50ohms and Yageo manufacturer
Part Number:: RC0402JR-0751RL
2) Inductor value :: 0.6nH and Murata manufacturer
Part Number:: MLG1005S0N6CT000
3) Capacitor Value :: 0.5pF and Murata manufacturer
Part Number::GRM1555C1HR50BA01D
4) SMA Connector :: Edge Mount and Amphenol manufacturer
Part Number:: 132357-11