Installation Manual

Redpine Signals, Inc. Proprietary and Confidential Page 8
User Manual
Version 2.0.0
Band
(GHz)
Bandwidth
(MHz)
Channel
Number
Center Frequency (MHz)
2.4 20 6 2437
2.4 20 7 2442
2.4 20 8 2447
2.4 20 9 2452
2.4 20 10 2457
2.4 20 11 2462
5 20 36 5180
5 20 40 5200
5 20 44 5220
5 20 48 5240
5 20 149 5745
5 20 153 5765
5 20 157 5785
5 20 161 5805
5 20 165 5825
Table 1: Channel Numbers and Corresponding Center Frequencies
<expa>: Enable/Disable External PA. This parameter is not supported in
the current release.
<rf>: Rate Flags. This parameter is used to enable/disable Short GI and
Greenfield and also to set the channel width of the transmitted packets.
The table below explains the flags that can be enabled and disabled.
Multiple flags can be set at a time.
Bit Description
0 Short GI
0 – Disable Short GI
1 – Enable Short GI
1 Greenfield transmission
0 – Disable Greenfield transmission