User Manual
11
RS9113
PHY Evaluation Test Utility
User Guide for Linux
Table 1 Channel Number and Frequencies for 20MHz Channel Width in
2.4GHz
Set External PA enable/disable:
If the module contains an external PA, to enable the usage of the PA,
enter a value of 1, else enter a value of 0. This support is currently not
handled in driver.
Set Rate flags:
Rate flags contain short GI, Greenfield and channel width values. Various
fields in rate flags are divided as specified below
Fields
Short GI
Greenfield
Channel
Width
Reserved
Bits:
0
1
2 – 4
5 - 15
Table 2 Rate Flags
To enable short GI – set rate flags value as ‘1’
To enable Greenfield – set rate flags value as ‘2’
Channel
Numbers (2.4GHz)
Center
frequencies for
20MHz channel
width(MHz)
1
2412
2
2417
3
2422
4
2427
5
2432
6
2437
7
2442
8
2447
9
2452
10
2457
11
2462