Operating Instructions

M901P-KS WIRED & WIRELESS GAMING MOUSE
OPERATING INSTRUCTIONS
Dear user,
Thank you for choosing our REDRAGON product. To protect your rights and for better
customer service, we ask that you note our warranty rules.
1. Within 18 months of purchase date, repair is guaranteed for failure due to electrical
circuit problems. Man-made damages, such as disassembly, hard impacts,
submersion into water, plugging into improper current or voltage, and damage caused
by natural disasters such as fire, flood, or earthquake are not included.
2. Consumable parts (such as foot pad) and spare parts replacement are not included in
our warranty.
OS Support
Windows XP/ Vista/ Win 7/ Win 8/ Win 10
Button Description
1. Left mouse button.
2. Right mouse button.
3. Scroll wheel and middle button
4. Forward button
5. Backward button
6. DPI+ button (defaulted to speed up the cursor).
7. DPI- button (defaulted to slow down the cursor).
8. Polling rate switch button
9. Working Mode button (used to switch among the two working modes)
10. Power Switch: Power On with LED ON/ Power OFF / Power On without LED
Basic Operation:
How to Connect the Mouse with a Computer
Wired Connection
1. Take out the USB to USB C cable in the package and connect the mouse with your
computer.
2. Slide the power switch on the bottom of the mouse to Power On with LED ON or Power On
without LED.
3. The computer will recognize and configure the mouse automatically.
4. The mouse will be ready for use when the configuration is finished. The LED on left and
right size will light on then if the power switch on the bottom of the mouse to Power On with
LED ON.
5. The mouse is under recharging whatever the power switch is put to On with or without
LED ON. The scroll wheel will light up if the power switch is put to Power ON with LED ON.
And it does not light up if the power switch is put to Power On without LED .It may take
about four hours for the mouse to be fully recharged.

Summary of content (5 pages)